Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
URL: http://www.studio-22.com | E-MAIL: studio22@studio-22.com
 
SOBRE LA TIENDA ALTA FIDELIDAD CINE EN CASA AUDIO PERSONAL ACÚSTICA
NOTICIAS MARCAS Y PRODUCTOS ALTAVOCES PULSAR AUDIO REPORTAJES DE FERIAS CÓMO CONTACTAR
NOVEDADES CATÁLOGO
CÓMO COMPRAR
DISPONIBILIDAD
GASTOS DE ENVÍO
FINANCIACIÓN
FORMULARIOS DE PEDIDO








 



 






 






Hazte fan en Facebook

Síguenos en Twitter

Datos studio-22.com

· Tamaño web:
44,5 GB
· Nº de subpáginas: 14.553
· Nº de imágenes: 104.035
· Nº de archivos PDF: 6.588

Portada > Amplificadores de auriculares a corriente > Violectric > Violectric HPA V220
Violectric HPA V220
Más información en http://www.lake-people.de/
OPCIONES
+ 199 € DAC con entrada a elegir entre USB, coaxial u óptica 96/24
+ 249 € DAC con entrada a elegir entre USB, coaxial u óptica 192/24
+ 250 € Versión con volumen motorizado con control remoto
+ 500 € Versión con volumen de 128 pasos con control remoto
AMPLIFICADOR DE AURICULARES CON DAC OPCIONAL

Versions:
Front silver or black
Feet silver or black or gold

Volume control manual or
remote controlled with motor potentiometer or
remote controlled with 128-step relay attenuator

The HPA V220 was developped with the target to enable ultimate transmission quality for low- , medium- and high-impedance headphones.
Due to its specific, variable, low-noise and low-distortion circuit design especially optimised for dynamic headphones, the HPA V220 fulfils even most sophisticated demands.
Furthermore HPA V220 offers selectable inputs and an output management.

LOW-NOISE
because of low internal gain.
Therefore the self generated noise from the amplifer is not audible.

HIGH OUTPUT VOLTAGE
through 60 Volt internal operating voltage.
Therefore best suited for high impedance headphones.
Over 90 % of all headphone amplifiers in the market offer not half that voltage !

HIGH OUTPUT POWER
because of powerful amplifiers able to deliver much more current a headphone needs.
Therefore best suited for low impedance headphones and even magnetostatic cans !!

HIGH DAMPING FACTOR
through lowest output impedance.
Therefore best suited for full control even over critical headphones with the garantee to have flatest possible response.

Características:

  • Balanced inputs with gold-plated Neutrik XLR connectors
  • Unbalanced inputs with gold-plated RCA connectors
  • Balanced line outputs with gold plated XLR connectors
  • Unbalanced line outputs with gold plated RCA connectors
  • Line outputs assignable to be with fixed or variable level
  • 6 optional digital audio inputs 24 Bit / 96 or 192 kHz
  • 3 switchable inputs with dedicated buttons on the front
  • PRE-GAIN = switchable input gain in five steps
  • Independent channel design
  • ALPS RK27 High-Grade volume control
  • ALPS RK27 High Grade balance control
  • High-Quality op-amps in the signal path
  • High-quality MKP capacitors in the signal path
  • 0.1 and 1% metal film resistors throughout the unit
  • Discrete-design power amp with 8 transistors per channel
  • 2 silver-plated Neutrik headphone outputs
  • Relay-based headphone output cut- off with delayed switch-on
  • Output management with dedicated buttons on the front:
    line outputs active, headphone outputs active, both active, both off (Mute)
  • Large toroidal transformer (15 W)
  • Large filtering capacitors in the power supply (18.000 uF)
  • Switchable ground lift
  • Rugged aluminium case with Nextel coating
  • Solid, laser-engraved aluminium front panel

The inputs and outputs are situated on the rear panel, they are equipped with electronically balanced gold plated XLR connectors and unbalanced gold plated RCA connectors.
This amp may be additionally equipped with one of six different digital inputs:
Coaxial, optical or USB with either 24/96 kHz or 24/192 kHz
Balanced and unbalanced line outputs on the rear panel. These can be set to have fixed output level (mirrored from the input) or variable output level from the volume control.
Volume control is provided with a high-grade ALPS RK 27 pot with a large full metal rotary knob.
Additionally a balance control serves to correct the stereo image.
V220 incorporates the award winning famous 8-transistor (per channel) amps from V200 for a smooth and relaxed sound stage.
The output management enables the amp to act as your personal preamp when desired.
Feel free to activate the headphones outputs or the line outputs independently from each other with dedicated buttons on the front panel.
Lots of protection circuits will care for the safe operation of your headphones.
Two headphones may be connected via 1/4" jacks on the front panel.
Case and back panel are made of aluminium and are Nextel coated.
The 8 mm aluminium frontpanel is milled, sand blasted and silver anodized.
The labeling is laser engraved.


Especificaciones:

Entradas balanceadas 2, conectores XLR bañados en oro
Entradas no balanceadas 2, conectores RCA bañados en oro
Voltaje de entrada máximo + 21 DBu
Impedancia 10 kohmios
Salidas no balanceadas 2, conectores RCA bañados en oro
Salidas balanceadas 2, conectores XLR bañados en oro
Nivel de entrada nominal + 6 dBu
Ganancia de amplificación + 8 dB
-12 / -6 / 0 / +6 / +14 dB (con PRE-GAIN)
Rango de frecuencias 5 Hz ... 70 kHz (-0,5 dB)
3 Hz ... 200 kHz (-3 dB)
Impedancia de salida 0,1 ohmios
Factor de amortiguamiento 500 no balanceado
Rango dinámico >129 dB (ponderada A)
Ruido <- 101 dBu (ponderada A)
THD+N < -102 dB @ <0,00079 %
< -100 dB @ <0,001%
Diafonía < -105 (1 kHz)
< -103 (15 kHz)
Nivel máximo de salida > 20 Veff in 600 ohms = 670 mW
> 17,5 Veff in 100 ohms = 3050 mW
> 11,6 Veff in 50 ohms = 2700 mW
> 9,5 Veff in 32 ohms = 2800 mW
> 4,9 Veff in 16 ohms = 1500 mW
Salidas 2 x Conectores jack 6,3 mm
Fuente de alimentación 230/115 VAC 25 VA
Dimensiones 170 mm (ancho) x 112 mm (alto) x 320 mm (fondo)
Material de la carcasa Aluminio anodizado en negro o en plata
...
PVP recomendado:
1.499 €
IVA incluido

  Nuestro proveedor dispone de stock de este producto. Disponible en 72-96 horas

  Nuestro proveedor dispone de stock de este producto. Disponible en 72-96 horas


Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Acabados posibles:


Plata

Negro

 
Studio 22

   Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
   HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
   URL: http://www.studio-22.com | E-MAIL:

 

 

Volver arriba