Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
URL: http://www.studio-22.com | E-MAIL: studio22@studio-22.com
 
SOBRE LA TIENDA ALTA FIDELIDAD CINE EN CASA AUDIO PERSONAL ACÚSTICA
NOTICIAS MARCAS Y PRODUCTOS ALTAVOCES PULSAR AUDIO REPORTAJES DE FERIAS CÓMO CONTACTAR
CERRADOS POR VACACIONES DEL 7 AL 27 DE AGOSTO 2017
NOVEDADES CATÁLOGO
CÓMO COMPRAR
DISPONIBILIDAD
GASTOS DE ENVÍO
FINANCIACIÓN
FORMULARIOS DE PEDIDO








 



 






 






Hazte fan en Facebook

Síguenos en Twitter

Datos studio-22.com

· Tamaño web:
32,1 GB
· Nº de subpáginas: 10.185
· Nº de imágenes: 78.492
· Nº de archivos PDF: 4.849

Portada > Preamplificadores de phono > Puresound > Puresound P10
Puresound P10
Más información en http://www.puresound.info/
PREAMPLIFICADOR DE PHONO MM
Descarga del catálogo en .PDF

The P10 phono amplifier is the latest addition to the highly acclaimed Pure Sound product range. It is intended to meet the requirements of audio enthusiasts who still enjoy the distinctive strengths and high quality of reproduction that can be derived from vinyl records. It is compatible with moving magnet and high output moving coil cartridges. Low output moving coil cartridges will require the use of an additional step-up device or matching transformer. Full output from the P10 is sufficient to drive the line level inputs of any integrated amplifier or pre-amplifier.

The active amplification stages use double triodes in a simple anode follower configuration. The phono equalisation is achieved using passive components and can therefore maintain its accuracy over time without introducing the unacceptable levels of phase shift found in active equalisation stages. There is no negative feedback in the circuit.

The P10 features a particularly elaborate HT power supply. After the initial rectification and smoothing, the supply is split and two separate, heavily decoupled high voltage rails are established. These feed each half of the output valve while further decoupling of each rail allows the cleanest and most independent voltage rails possible to feed each half of the input valve. The absolute stability of this supply regardless of the demands made by the audio signal on the circuit, lends the P10 a stability and poise which allows effortless reproduction of the most demanding source material. The valve filaments are also fed by a DC supply thereby ensuring constant operating conditions for the amplifier.

The circuit makes use of close tolerance metal film resistors, polypropylene signal coupling capacitors and selected valves.

The P10 phono amplifier meets the very strict performance criteria required of all Pure Sound products and will give excellent results with vinyl records provided that it is used with appropriate ancillary equipment.

 


Pulsar en la foto para ampliar

Pulsar en la foto para ampliar


Especificaciones
:

Impedancia de entrada 47 kohmios MM
Gain @ 1kHz x100 (40 dB)
Impedancia de salida <5Kohm
Consumo máximo de energía 15W
Dimensiones
(ancho x alto x fondo)
215 mm x 90 mm x 360 mm
Válvulas implementadas 1 x ECC83
1 x 6922
Peso 5 kg
...
PVP recomendado:
995 €
IVA incluido

 


Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Acabados:


Negro

 
Studio 22

   Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
   HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
   URL: http://www.studio-22.com | E-MAIL:

 

 

Volver arriba